Two layers of high-strength steel wire braided reinforcement are separated by a rubber layer, an inner layer of nitrile rubber, and an outer layer of oil-resistant, wear-resistant and weather-resistant black synthetic rubber.
+86 0551-67291852
Hose structure: Two layers of high-strength steel wire braided reinforcement layer with a rubber layer in the middle, nitrile rubber inner layer, good chemical compatibility, oil-resistant, wear-resistant and weather-resistant black synthetic rubber outer layer.
Application: High-pressure conditions, used for petroleum-based hydraulic oil, water glycol, emulsion, hot oil, grease, lubricant, crude oil and fuel oil, air, water and bio-oil, need to be punctured when used for pressure gas above 17 bar.
Adapter: Parker non-peeling one-piece connector
SAE 100 R2 AT, EN 853-2SN
Adapter: Crimp type 43, 71 series
Temperature range: -40℃~+100℃
Air: up to +70℃, water: up to +85℃
