Cold drawn square bar as body material
Nonrotating stem for longer seat life
Roddable, straight through flow path for maximum
flow with minimum pressure drop
Stem thread lubricant isolated from system media
Replaceable seat and stem tip design
Stem thread protected from outside contamination
by PTFE ring in the gland
Panel mounting available
Handles of different colors available
Every valve leak tested with Nitrogen or compressed
air at the maximum allowable working pressure
Working pressure up to:
Stainless steel: 6000 psig (414 bar)
Working temperature with seat:
Acetal: -20°F to 250°F (-28°C to 121°C)
PEEK: -20°F to 450°F (-28°C to 232°C)
Working temperature with O-ring:
Fluorocarbon Rubber (FKM):
20°F to 400°F (-28°C to 204°C)
Nitrile Butadiene Rubber (NBR):
-20°F to 212°F (-28°C to 100°C)
Ethylene Propylene Diene Rubber (EPDM):
20°F to 300°F (-28°C to 148°C)
+86 0551-67291852
