The spring sheath is made of wear-resistant steel wire, which can protect the hose from wear and extend the life of the hose.
Usage: First measure the outer diameter of the hose, select the spring closest to the inner diameter, cut a section of spring approximately equal to 1/3 of the length of the hose, stretch the spring to the length of the entire hose, and twist the spring from the opposite direction of the spring winding The spring is screwed into the outer layer of the hose, and the connector is then crimped.
+86 0551-67291852
The spring sheath is made of wear-resistant steel wire, which can protect the hose from wear and extend the life of the hose.
Usage: First measure the outer diameter of the hose, select the spring closest to the inner diameter, cut a section of spring approximately equal to 1/3 of the length of the hose, stretch the spring to the length of the entire hose, and twist the spring from the opposite direction of the spring winding The spring is screwed into the outer layer of the hose, and the connector is then crimped.
